The Aruba 2530-8G Switch is a fully managed layer 2 switch with 8 10/100/1000 ports and 2 dual personality ports.
The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver Layer 2 capabilities with optional PoE+, optional 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and power savings with Energy Efficient Ethernet. The Aruba 2530 Switch Series is easy to use and deploy, and delivers consistent wired/wireless user
Limited Lifetime Warranty:
See www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase. Software releases: for details on the software releases available with your product purchase, refer to www.hpe.com/networking/warrantysummary
Technical Specification | |
OEM | HP |
Series | HP 2530 |
Partcode | HP 2530-8G Switch (J9777A) |
Type | 1U |
CPU | Intergated |
10/100 SFP / T | 0 |
POE ports | 0 |
1G SFP / T | 8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports |
10G SFP+ / T | 0 |
40G | 0 |
Fan | fanless |
PSU | 1 |
Max power rating | 18.6 W |
Stacking | N/A |
Module options | N/A |
Licencing options | N/A |
Bandwidth | 20 Gbps |
Forwarding rate | up to 77.3 million pps (64-byte packets) |
MAC table | 16000 entries |
Multicast | yes |
VLAN ID’S | 4094 |
ARP | yes |
Static Route | N/A |
IPv4 Routes | N/A |
IPv4 Multicast Routes | N/A |
IPv6 Routes | N/A |
IPv6 Multicast Routes | N/A |
Jumbo Frames | 9220-byte |
MPLS | N/A |
Layer 2 Protocols | yes |
Monitoring | • RMON (remote monitoring) provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events |
VRF | N/A |
MLAG | N/A |
LAG | N/A |
STP | yes |
Storm Control | N/A |
VLANs maxium | 512 |
Dynamic VLANs | yes |
Private VLAN | N/A |
MVR | N/A |
OSPF | N/A |
IS-IS | N/A |
BGP | N/A |
RIP | N/A |
Policy-based routing | N/A |
uRPF | N/A |
NAT / PAT | N/A |
GRE | N/A |
IP SLA | N/A |
Modular OS | N/A |
ISSU | N/A |
Process Monitoring and Restart | N/A |
First Hop Redundancy | N/A |
N/A | |
ECMP | N/A |
BFD | N/A |
Queues per port | • Traffic prioritization (IEEE 802.1p) allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP) • Simplified QoS configuration – Port-based prioritizes traffic by specifying a port and priority level – VLAN-based prioritizes traffic by specifying a VLAN and priority level • Class of Service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ • Rate limiting sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic • Layer 4 prioritization enables prioritization based on TCP/UDP port numbers • Flow control helps deliver reliable communication during full-duplex operation |
Strict priority queue (EF) | N/A |
Control-Plane Policing | N/A |
Telnet / SSH | Telnet,SSH,web-managed |
SNMP | SNMPv1/v2c/v3 |
sFlow (RFC 3176) / NetFlow | yes |
Timing | N/A |
Port Mirroring | yes |
LLDP/CDP | LLDP |
Management Access | IMC – Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB |
AAA | Radius,TACACS+ |
DoS, DDoS Protection | yes |
Port Security | yes |
Access List | N/A |
Dimensions | 10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm) (1U height) |
Weight | 2.0 lb (0.91 kg) |
Temprature – Operating / Storage | Operating temperature 32°F to 113°F (0°C to 45°C) Storage temperature -40°F to 158°F (-40°C to 70°C) |
Certification | UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC |
MTBF | N/A |
Heat Dissipation | 63 BTU/hr (66.46 kJ/hr), (switch only: 63 BTU/hr) |
Reviews
There are no reviews yet.